Marshall Excelsior High Flow Thermo Pigtail 1/4" inverted Flare- 15"

Quick Facts: 

• Between 240 F and 300 F the brass nipple displaces (approximately 1/4”) closing the cylinder valve module and stopping the flow of gas from the container.
• Inside the brass nipple is a flow-limiting device designed to sense excess gas flow. If excessive gas flow is detected, the pigtail will shut down the flow to a maximum of 10 SCFH (by-pass flow).
• 400,000 BTU’s
• Excess Flow Safety Shut-Off
• RVIA and NFPA 1192 Compliant
• Brass Ferrules
• 1/4” ID High Pressure Thermoplastic Hose
• Length: 15".
• 100% Leak Tested
• 350 PSIG Working Pressure
• Female QCC (Quick Check Connector) Type 1 Connection x 1/4 Inch Male Inverted Flare
• Specifically designed for motorhomes, trailers and on demand hot water heaters.

Part Number: MER425H-15P

YOUNG TRUCK AND TRAILER PARTS | KAYSVILLE

HOURS: Mon – Fri | 8am to 6pm    Sat | 9am-5pm
PHONE: (385)382-0071
LOCATION: 220 North 650 West, Kaysville, UT 84037
www.youngtruckandtrailer.com
*Financing Available
*Pricing Does not include tax or shipping cost